LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 1227 (Steering) >> 48 Steering >> Overview - Steering Column, RHD >> Steering Column, Removing And Installing, RHD >> Installing >> Tightening Specification

Tightening Specification

WARNING: This page is about a different car, the 2014 Volkswagen Touareg, 2013 Volkswagen Touareg, 2012 Volkswagen Touareg, and 2011 Volkswagen Touareg. However, it is still accessible from the selected car via links, so may be relevant.
Component Tightening Specification
Universal Joint To The Power Steering Gear
  • Use a new bolt
 20 Nm  + 90°
Steering Column To Crossmember 20 Nm 
Steering Column To The Vibration Isolator
  • Use new nut
 20 Nm 
Heat Shield To Power Steering Gear 9 Nm 
Protective Boot To Bulkhead 4 Nm 
scientia non olet · About LEMON Manuals