Brake Caliper, Removing And Installing: Installing: Notes

WARNING: This page is about a different car, the 2014 Volkswagen Touareg, 2013 Volkswagen Touareg, 2012 Volkswagen Touareg, and 2011 Volkswagen Touareg. However, it is still accessible from the selected car via links, so may be relevant.

Special Tools And Workshop Equipment Required

Torque Wrench 1332 40-200 Nm :VAG1332
Brake Pedal Actuator:VAG1869/2 .

-- Install the brake pads. Refer to BRAKE PADS, REMOVING AND INSTALLING .

-- Bolt brake caliper onto wheel bearing housing.

-- Install brake line on brake caliper.

-- Press the brake pad wear display wire into the opening in the brake caliper.

-- Connect the connectors of brake pad wear indicator in the bracket on the brake caliper.

-- Remove the Brake Pedal Actuator:VAG1869/2 .

-- Bleed the brake system. Refer to BRAKE SYSTEM, BLEEDING .

-- Install the wheels.

Wheel bolt Tightening Specifications. Refer to WHEEL BOLT TIGHTENING SPECIFICATIONS .

NOTE:

Before moving the vehicle, press the brake pedal firmly several times to seat the brake pads correctly in their operating position.

CHECK BRAKE FLUID LEVEL.