Overview - Brake Caliper, BREMBO 17"

WARNING: This page is about a different car, the 2014 Volkswagen Touareg, 2013 Volkswagen Touareg, 2012 Volkswagen Touareg, and 2011 Volkswagen Touareg. However, it is still accessible from the selected car via links, so may be relevant.

Install complete repair kit when servicing.
Only use mineral spirits to clean brake parts.
Apply thin coat of Assembly Paste:G 052 150 A2 to brake cylinders, pistons and seals.

Fig 1: Brake Caliper With PR No. 1LE Remove/Install Components

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Dust Cap
- Install onto bleeder valve
- Secures brake pad wear indicator wiring
Bleeder Valve
- 12 Nm
- Lightly coat the threads with Assembly Paste:G 052 150 A2 before screwing in.
- 8 mm
Brake Caliper
Seal
- Removing and installing. Refer to BRAKE CALIPER PISTON, REMOVING AND INSTALLING, BREMBO 17" AND 18" .
46 mm Piston
- Removing and installing. Refer to BRAKE CALIPER PISTON, REMOVING AND INSTALLING, BREMBO 17" AND 18" .
- Apply thin coat of Assembly Paste:G 052 150 A2 to piston before inserting
Protective Cap
- Do not damage when installing piston