Brake System, Bleeding Using Brake Charger/Bleeder Unit :Vas5234: Bleeding
WARNING: This page is about a different car, the 2014 Volkswagen Touareg, 2013 Volkswagen Touareg, 2012 Volkswagen Touareg, and 2011 Volkswagen Touareg. However, it is still accessible from the selected car via links, so may be relevant.
Special Tools And Workshop Equipment Required
- Brake Charger/Bleeder Unit:VAS5234
- Brake Bleeding Tool Set:VAS6564
WARNING:
Only use new brake fluid conforming to VW standard (VW 501 14).
Adhere strictly to work sequence when bleeding brake system.
- There are two bleeder valves on Brembo brake calipers. Always bleed at both bleeder valves.
- Bleed at outer bleeder valve first.
-- Connect the Brake Charger/Bleeder Unit:VAS5234 .
-- Open the bleeder valves in the specified sequence and bleed the brake calipers.
1 - Left front brake caliper
2 - Right front brake caliper
3 - Right rear brake caliper
4 - Left rear brake caliper
Use suitable bleeder hose. It must fit tightly on bleeder valve so that no air gets into brake system.
-- With bleeder bottle hose attached, leave bleeder valves open long enough that brake fluid exits without bubbles.