LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 1225 (Hydraulic Components) >> 47 Hydraulic Components >> Brake Master Cylinder, Removing And Installing >> Brake Master Cylinder, Removing And Installing, RHD Vehicles >> Installing >> Tightening Specification

Tightening Specification

WARNING: This page is about a different car, the 2014 Volkswagen Touareg, 2013 Volkswagen Touareg, 2012 Volkswagen Touareg, and 2011 Volkswagen Touareg. However, it is still accessible from the selected car via links, so may be relevant.
Components Tightening specification
Brake Master Cylinder To Brake Booster
  • Use New Nuts!
23 Nm 
Brake Lines To Brake Master Cylinder 18 Nm 
Brake Lamp Switch -F- to the brake master cylinder 5 Nm 
Brake fluid reservoir to the brake master cylinder 8 Nm 
Coolant expansion tank to the body 9 Nm