Brake Master Cylinder, Removing And Installing, RHD Vehicles: Installing: Notes
WARNING: This page is about a different car, the 2014 Volkswagen Touareg, 2013 Volkswagen Touareg, 2012 Volkswagen Touareg, and 2011 Volkswagen Touareg. However, it is still accessible from the selected car via links, so may be relevant.
Install In Reverse Order Of Removal.Note The Following:
-- When installing together the brake master cylinder and brake booster, make sure that the push rod is correctly located in the brake master cylinder.
-- Bleed the brake system. Refer to BRAKE SYSTEM, BLEEDING .
Coat the plugs with brake fluid before pushing the brake fluid reservoir into the master brake cylinder.