Brake Lamp Switch -F-, Removing And Installing, RHD Vehicle: Installing: Notes
WARNING: This page is about a different car, the 2014 Volkswagen Touareg, 2013 Volkswagen Touareg, 2012 Volkswagen Touareg, and 2011 Volkswagen Touareg. However, it is still accessible from the selected car via links, so may be relevant.
-- Install In Reverse Order Of Removal. When doing this Note The Following.
-- Insert the Brake Lamp Switch -F- -1- into the clip at the top of the brake master cylinder and thread in the bolt.
-- Check the brake lamp function.