Brake Booster, Removing And Installing, RHD Vehicle: Installing: Notes
WARNING: This page is about a different car, the 2014 Volkswagen Touareg, 2013 Volkswagen Touareg, 2012 Volkswagen Touareg, and 2011 Volkswagen Touareg. However, it is still accessible from the selected car via links, so may be relevant.
Install In Reverse Order Of Removal. Note The Following:
-- Carefully install the brake booster and tighten the nuts.
-- Clip the brake pedal to the brake booster. Refer to BRAKE PEDAL, ATTACHING TO BRAKE BOOSTER .
-- When installing together the brake master cylinder and brake booster, make sure that the push rod is correctly located in the brake master cylinder.
Coat the plugs with brake fluid before pushing the brake fluid reservoir into the master brake cylinder.
-- Bleed the brake system. Refer to BRAKE SYSTEM, BLEEDING .