Rear Emblem, Removing And Installing: Installing
WARNING: This page is about a different car, the 2014 Volkswagen Touareg, 2013 Volkswagen Touareg, 2012 Volkswagen Touareg, and 2011 Volkswagen Touareg. However, it is still accessible from the selected car via links, so may be relevant.
-- Follow the assembly instructions. Refer to NAME BADGES, REMOVING AND INSTALLING .
-- Remove any adhesive residue with Adhesive Strip Remover: VAS6349 .
-- Clean the adhesive surface with adhesive remover before bonding.
- The adhesive surface must be free of dust, grease and adhesive residue.
-- Remove protective foil.
-- Place the emblem -1- with the centering pins -2- in the indentations -3- on the rear lid.
-- Push the brand emblem on using force.