LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 1221 (Exterior Lights, Switches) >> 94 Exterior Lights, Switches >> Steering Column Switch >> Steering Column Electronics Control Module -J527- >> Steering Column Electronics Control Module -J527-, Coding

Steering Column Electronics Control Module -J527-, Coding

WARNING: This page is about a different car, the 2014 Volkswagen Touareg, 2013 Volkswagen Touareg, 2012 Volkswagen Touareg, and 2011 Volkswagen Touareg. However, it is still accessible from the selected car via links, so may be relevant.

The Airbag Spiral Spring/Return Spring with Slip Ring -J527- and the Steering Angle Sensor -F138- are integrated in the Steering Column Electronics Control Module -G85-.

NOTE:

Code the new Steering Column Electronics Control Module -J527- after installing it. Refer to STEERING COLUMN ELECTRONICS CONTROL MODULE -J527-, CODING .

If the steering column switch is faulty, then perform an output diagnostic test for the Steering Column Electronics Control Module -J527-.

The Steering Column Electronics Control Module -J527- can be checked via the output diagnostic test.

-- Connect the Vehicle Diagnostic Tester. Refer to VEHICLE DIAGNOSTIC TESTER .

-- In Vehicle Diagnostic Tester, select operating mode "Guided Fault Finding"  .

-- Using the "GO TO" button, select "Functions/Component Selection" and the following menu options in sequence: