Peripheral Camera Control Module -J928-, Removing And Installing: Installing
WARNING: This page is about a different car, the 2014 Volkswagen Touareg, 2013 Volkswagen Touareg, 2012 Volkswagen Touareg, and 2011 Volkswagen Touareg. However, it is still accessible from the selected car via links, so may be relevant.
Install In Reverse Order Of Removal.
If necessary, replace Velcro strips -arrows- on bottom of control module.
If Control Module Was Replaced
-- Code the control module. Refer to PERIPHERAL CAMERA CONTROL MODULE -J928-, CODING .
-- Calibrate the system again. Refer to AREA VIEW CAMERA SYSTEM, CALIBRATING .