Parking Aid Control Module -J446- Removing And Installing, RHD: Installing:
WARNING: This page is about a different car, the 2014 Volkswagen Touareg, 2013 Volkswagen Touareg, 2012 Volkswagen Touareg, and 2011 Volkswagen Touareg. However, it is still accessible from the selected car via links, so may be relevant.
Install In Reverse Order Of Removal. Note The Following:
-- Slide the Parking Aid Control Module -J446- in the mount on the bracket first, and then tighten it.
-- Tighten the screw attaching the Parking Aid Control Module -J446- to the control module mount to 1.5 Nm.