Image Processing Control Module -J851-, Removing And Installing: Removing:
WARNING: This page is about a different car, the 2014 Volkswagen Touareg, 2013 Volkswagen Touareg, 2012 Volkswagen Touareg, and 2011 Volkswagen Touareg. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the right front seat. Refer to FRONT SEAT, REMOVING AND INSTALLING .
-- Remove the air duct -1- upward and fold up the carpet -2-.
-- Disconnect both connectors -1 and 2-.
-- Loosen the Velcro® holding the Image Processing Control Module -J851- -3- to the bracket and remove the control module upward.