LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 1221 (Exterior Lights, Switches) >> 94 Exterior Lights, Switches >> Hid Headlamp With Dynamic High Beam Control >> Headlamp, Removing And Installing >> Installing

Headlamp, Removing And Installing: Installing

WARNING: This page is about a different car, the 2014 Volkswagen Touareg, 2013 Volkswagen Touareg, 2012 Volkswagen Touareg, and 2011 Volkswagen Touareg. However, it is still accessible from the selected car via links, so may be relevant.

Install In Reverse Order Of Removal. Note the following:

-- Tighten all threaded connections to the tightening specifications given in the assembly overview. Refer to OVERVIEW - HID HEADLAMP WITH DYNAMIC HIGH BEAM CONTROL .

-- Check installation position of headlamp for uniform gap dimensions.

If headlamp has an uneven gap dimension to the body, installation position must be corrected. Refer to HEADLAMP INSTALLED POSITION, CORRECTING .

-- Check headlamp for function.

-- Check the headlamp adjustment and adjust the headlamp if necessary. Refer to => 29.1.

scientia non olet · About LEMON Manuals