LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 1221 (Exterior Lights, Switches) >> 94 Exterior Lights, Switches >> Hid Headlamp With Dynamic High Beam Control >> General Information

General Information

WARNING: This page is about a different car, the 2014 Volkswagen Touareg, 2013 Volkswagen Touareg, 2012 Volkswagen Touareg, and 2011 Volkswagen Touareg. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:

Note usage and safety notes for HID headlamp bulbs. Refer to HID HEADLAMP USAGE AND SAFETY PRECAUTIONS .

NOTE:

Before working on HID headlamps and dynamic high beam control, always switch off headlamps and remove ignition key.

The automatic headlamp range control and cornering lamp in HID headlamps have On Board Diagnostics (OBD).

Familiarity with the function and operation of the lighting system is needed if there are customer concerns.

Additional Information:

Refer to the Owner's Manual.

Refer to the Self Study Programs

Refer to => Wiring Diagram

Malfunction Recognition and Malfunction Indicator

The automatic headlamp range control, cornering lamps and vehicle electrical system control module are equipped with On Board Diagnostic (OBD) which assists troubleshooting of headlamps with HID lamps and cornering lamps.

The "Guided Fault Finding"  function is to be used for troubleshooting of one of the systems described as in service information "Vehicle Diagnosis, Testing and Information System". Refer to VEHICLE DIAGNOSTIC TESTER .

NOTE:

The "lamp failure indicator lamp" in the instrument cluster will indicate if there is a malfunction in the headlamp range control or the variable front lighting. Refer to WARNING LAMP SYMBOLS IN INSTRUMENT CLUSTER .