Level Control System Control Head -E281- And Axle Alignment Switch, Removing And Installing: Removing
WARNING: This page is about a different car, the 2014 Volkswagen Touareg, 2013 Volkswagen Touareg, 2012 Volkswagen Touareg, and 2011 Volkswagen Touareg. However, it is still accessible from the selected car via links, so may be relevant.
-- Turn off the ignition and all electric consumers and remove the key.
-- Remove selector lever trim. Refer to STORAGE COMPARTMENTS, COVERS AND TRIM .
-- Squeeze the 3 retainers -arrows- and push the switch -1- out of the trim.