HYPOID Driven Gear Backlash

WARNING: This page is about a different car, the 2012 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.

Using a dial gauge, check the backlash of hypoid driven gear.

Hypoid driven gear backlash:

0.10 - 0.20 mm (0.004 - 0.008 in)

If the hypoid driven gear backlash is not within the specification, adjust the side retainer shim or repair if necessary.

Fig 1: Measuring Hypoid Driven Gear To Drive Pinion Backlash

Courtesy of SUBARU OF AMERICA, INC.