LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 1219 (Body Front) >> 50 Body Front >> Plenum Chamber Bulkhead >> Plenum Chamber Bulkhead, Removing And Installing >> Plenum Chamber Bulkhead, Removing

Plenum Chamber Bulkhead, Removing

WARNING: This page is about a different car, the 2014 Volkswagen Touareg, 2013 Volkswagen Touareg, 2012 Volkswagen Touareg, and 2011 Volkswagen Touareg. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:

The center portion of the plenum chamber bulkhead can only be removed when the two side parts are removed.

Fig 1: Exploded View Of Left And Right Plenum Chamber Bulkheads
GWWN50-10979Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

For the left plenum chamber bulkhead:

-- Remove the bolts -3-.

-- Lift out the left plenum chamber bulkhead -2- with the seal -4-.

For the right plenum chamber bulkhead:

-- Remove the bolts -9-.

-- Lift out the right plenum chamber bulkhead -8- with the seal -7-.

For the center plenum chamber bulkhead

-- Loosen the existing fuel lines. Refer to FUEL SUPPLY SYSTEM [For engine(s) CGRA]

-- Remove the bolts -6-.

-- Remove the hex nuts -5-.

-- Lift out the center plenum chamber bulkhead -1-.