Windshield And Rear Window Washer System
The following hose connection types are used for connecting hoses to pumps and spray nozzles or as separating points:
-- To loosen the connection, pulling both halves of the coupling apart.
-- To secure the connection, push both halves of coupling together until felt and heard to engage.
-- To loosen the connection, turn the securing clip -1- 90° in direction of -arrow- and then pull the hose connection off.
-- To secure the connection, attach the hose connection and turn the securing clip -1- -arrow- until it engages.
-- To loosen the connection, lift the securing clip -1- approximately 1 mm -arrow- and then remove the hose connection.
-- To secure the connection, attach the hose connection and press in the securing clip -1- until it engages.
-- To secure the connection, attach the hose connection and press in the securing clip -1- until it engages.
-- To loosen the connection, pull the securing clip upward -1- in direction of -arrow- and remove the hose connection.
-- To secure the connection, attach the hose connection and press in the securing clip -1- until it engages.