Windshield Wiper Motor -V-, Removing From Wiper Frame: Removing

WARNING: This page is about a different car, the 2014 Volkswagen Touareg, 2013 Volkswagen Touareg, 2012 Volkswagen Touareg, and 2011 Volkswagen Touareg. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the wiper frame with the linkage and Windshield Wiper Motor -V-. Refer to WIPER FRAME WITH LINKAGE AND Windshield Wiper Motor -V-, REMOVING .

-- Remove hex nut -1-.

Fig 1: Identifying Hex Nut -1- And Crank -2-

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove crank -2- from wiper motor shaft.

-- Remove the three screws -arrows-.

Fig 2: Identifying Mounting Bolts -Arrows-

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the Windshield Wiper Motor -V- -1- from the wiper frame.

NOTE:

If Wiper Motor Control Module -J400- or Windshield Wiper Motor -V- is replaced, Wiper Motor Control Module -J400- must be coded. Refer to Wiper Motor Control Module -J400-, CODING .