Rear Window Wiper Motor -V12-, Removing And Installing: Installing

WARNING: This page is about a different car, the 2014 Volkswagen Touareg, 2013 Volkswagen Touareg, 2012 Volkswagen Touareg, and 2011 Volkswagen Touareg. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal. Note the following:

-- Before installing rear window wiper motor, coat inner side of rear window seal with water-soluble lubricant (for example polyethylene glycol) if necessary.

-- Make sure the seal for the opening in the rear window fits correctly before installing the Rear Window Wiper Motor -V12-. Marking -1- of seal must align with marking -2- on rear window.

Fig 1: Identifying Seal Marking And Rear Window Marking

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Tighten the nuts -arrows- to the assembly overview given in the assembly overview. Refer to OVERVIEW - REAR WINDOW WASHER SYSTEM .

-- Install wiper arm. Refer to WIPER ARM, REMOVING AND INSTALLING .