Spray Nozzle Holder, Removing And Installing: Removing

WARNING: This page is about a different car, the 2014 Volkswagen Touareg, 2013 Volkswagen Touareg, 2012 Volkswagen Touareg, and 2011 Volkswagen Touareg. However, it is still accessible from the selected car via links, so may be relevant.

-- Turn off the ignition and all electric consumers and remove the key.

-- Pull the spray nozzle out of the bumper cover all the way and remove the cap -1- from the pins on the spray nozzle holder.

Fig 1: Identifying Securing Clip -Arrow-

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Lift securing clip -arrow- slightly using a small screwdriver.

Fig 2: Identifying Washer Nozzle Bracket

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Pull out washer nozzle bracket.