Lift Cylinder For Spray Nozzles, Removing And Installing: Removing

WARNING: This page is about a different car, the 2014 Volkswagen Touareg, 2013 Volkswagen Touareg, 2012 Volkswagen Touareg, and 2011 Volkswagen Touareg. However, it is still accessible from the selected car via links, so may be relevant.

-- Turn off the ignition and all electric consumers and remove the key.

-- Remove the front bumper cover. Refer to FRONT BUMPER COVER .

-- Pull the spray nozzle out of the bumper cover all the way and remove the cap -1- from the pins on the spray nozzle holder.

Fig 1: Identifying Securing Clip -Arrow-

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove both bolts -1-.

Fig 2: Identifying Screws -1-

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Disconnect the hose connection -arrow-. Then remove the hose -1- and let any washer fluid drain out.

Fig 3: Identifying Hose -1- And Connection -Arrow-

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Press the tab -1- with a screwdriver to unlock it and remove the telescopic cylinder.

Fig 4: Identifying Tab -1-

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.