Front Passenger Frame, Removing And Installing: Installing
WARNING: This page is about a different car, the 2014 Volkswagen Touareg, 2013 Volkswagen Touareg, 2012 Volkswagen Touareg, and 2011 Volkswagen Touareg. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
20 rubber tabs are attached around the periphery of the rear side of the frame. Prior to installation, ensure that the frame is equipped with all rubber tabs!
-- Connect the vent harness connectors.
-- Install the front passenger frame -2- in the instrument panel, apply pressure on the bottom left and engage.
-- Use 3 bolts -1- to bolt the frame to the instrument panel (1.5 Nm ).
-- Install the trim on the front passenger side. Refer to FRONT PASSENGER TRIM, REMOVING AND INSTALLING .