Center Armrest CUPHOLDER, Removing And Installing: Removing

WARNING: This page is about a different car, the 2014 Volkswagen Touareg, 2013 Volkswagen Touareg, 2012 Volkswagen Touareg, and 2011 Volkswagen Touareg. However, it is still accessible from the selected car via links, so may be relevant.

Place the selector lever in the "N" position.
Open the storage compartment/ashtray unit.

-- Turn off the ignition.

-- Unclip the selector lever boot SELECTOR MECHANISM [For transmission(s) 0C8] [For engine(s) CGFA, CATA, CGRA] .

-- Remove the trim from the shift mechanism. Refer to GEARSHIFT MECHANISM TRIM, REMOVING AND INSTALLING .

-- Remove the 6 screws (2.5 Nm ) on the bottom of the gearshift mechanism trim and remove the cupholder.