LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 1213 (Maintenance (Intervals), Diagnosis) >> 03 Maintenance, Diagnosis >> My 2013 Maintenance Intervals >> My 2013 Maintenance Intervals (All Vehicles) - CANADA >> Service At 75.000 Km

Service At 75.000 Km

WARNING: This page is about a different car, the 2014 Volkswagen Touareg, 2013 Volkswagen Touareg, 2012 Volkswagen Touareg, and 2011 Volkswagen Touareg. However, it is still accessible from the selected car via links, so may be relevant.

Service at 75.000 km or one year after last service, whichever occurs first.

• AdBlue® fluid: Check and add if necessary (Passat 2.0L and Touareg 3.0L TDI engine only)

• Battery: Check (and second battery if applicable)

• Brake pads: Check thickness and brake disc condition. Look for contact pattern and corrosion of brake discs (front and rear)

• Coolant level and frost protection: Check

• Engine: Change oil and replace oil filter

• Engine and engine compartment components: Check (from above) for leaks and damage

• Engine and engine compartment components: Check (from below) for leaks and damage, check transmission, final drive and drive shaft boots

• Headlights: Check adjustment

• Hybrid components: Perform a visual inspection of high-voltage components and the lines in the engine compartment and the rear of the vehicle for damage

• Lighting: Front and rear lights, luggage compartment lighting, turn signals, hazard warning lights, daytime running lights, curve lighting, and automatic headlights: Check

• Rear window: Check cleaning nozzle functionality (if applicable)

• Service interval display: Reset

• Service sticker: Enter the date of the next service on the service sticker and apply to the driver's side-door pillar

• Tires: Rotate front to rear

• Visual inspection of windshield. Note damage if necessary

• Windshield washer, headlight cleaning system, and wiper blades: Check for damage and function. Check fluid level and add if necessary