Service At 150.000 Km
Service at 150.000 km or one year after last service, whichever occurs first.
• AdBlue® fluid: Check and add if necessary (Passat 2.0L and Touareg 3.0L TDI engine only)
• Battery: Check (and second battery if applicable)
• Brakes: Inspect brake system and shock absorber for leaks and damage, check thickness of brake pads, brake disc condition front and rear. Look for contact pattern and corrosion of brake discs, and check brake fluid level subject to abrasion
• Coolant level and frost protection: Check
• Dust and pollen filter: Replace (if applicable)
• Engine: Change oil and replace oil filter
• Engine and engine compartment components: Check (from above) for leaks and damage
• Engine and engine compartment components: Check (from below) for leaks and damage, check transmission, final drive and drive shaft boots
• Fuel filter: Replace (2.0L and 3.0L TDI engine only)
• Headlights: Check adjustment
• Hybrid components: Perform a visual inspection of high-voltage components and the lines in the engine compartment and the rear of the vehicle for damage
• Lighting: Front and rear lights, luggage compartment lighting, turn signals, hazard warning lights, daytime running lights, curve lighting, and automatic headlights: Check
• Rear window: Check cleaning nozzle functionality (if applicable)
• Service interval display: Reset
• Service sticker: Enter the date of the next service on the service sticker and apply to the driver's side-door pillar
• Sunroof: Open sunroof and check front water drains and clean if necessary (Touareg only)
• Timing belt: Check and replace if necessary (2.0L MPI only) If replaced at 90.000 km, check every 90.000 km after. If not replaced at 90.000 km, check every 30.000 km until replaced, then every 90.000 km
• Tires: Check tread depth, condition, wear pattern, and pressure of all tires (including spare)
• Tires: Rotate front to rear
• Visual inspection of windshield. Note damage if necessary
• Windshield washer, headlight cleaning system, and wiper blades: Check for damage and function. Check fluid level and add if necessary