Transmission Control Module -J217-, Removing And Installing: Notes
WARNING: This page is about a different car, the 2014 Volkswagen Touareg, 2013 Volkswagen Touareg, 2012 Volkswagen Touareg, and 2011 Volkswagen Touareg. However, it is still accessible from the selected car via links, so may be relevant.
Special Tools And Workshop Equipment Required
- Torque Wrench 1331 5-50 Nm :VAG1331
- Vehicle Diagnostic Tester
Short Description:
The Transmission Control Module -J217- is under the right front seat.
In order to remove the control unit, it is necessary disconnect the front seat from the vehicle body and then fold it to the rear. The seat stays in the vehicle.
If the control module was replaced, then it is necessary to get the identification and coding of the previous control module first before removing it.