Needle Bearing, Removing
WARNING: This page is about a different car, the 2014 Volkswagen Touareg, 2013 Volkswagen Touareg, 2012 Volkswagen Touareg, and 2011 Volkswagen Touareg. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the front final drive. Refer to FRONT FINAL DRIVE, REMOVING AND INSTALLING .
-- Remove the flange shaft and the left seal. Refer to LEFT FLANGE SHAFT SEAL, REPLACING .
-- Remove the needle bearing in the left flange shaft.
A - Puller - Kukko Internal - 36-46mm:21/6
B - Puller - Kukko Counterstay:22/2