Left Flange Shaft Dust Cap, Replacing: Procedure
WARNING: This page is about a different car, the 2014 Volkswagen Touareg, 2013 Volkswagen Touareg, 2012 Volkswagen Touareg, and 2011 Volkswagen Touareg. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the dust cap -B- from the flange shaft.
 Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
|
A - Kukko Separating Tool:17-2
-- Install the new flange shaft dust cap -A-.
 Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
|
NOTE:
Mount the Subframe Bushing Tool Kit - Assembly Tool 3:3301/3
so that the recess -arrow- faces the dust cap -A-.