Hydraulic Adjusting Elements, Checking: Notes
WARNING: This page is about a different car, the 2010 Audi A5, 2009 Audi A5, and 2008 Audi A5. However, it is still accessible from the selected car via links, so may be relevant.
Special Tools And Workshop Equipment Required
- Feeler Gauge
- Crankshaft Socket:T40058 for vehicles with the multitronic 0AW/automatic transmission 0B6
NOTE:
The Hydraulic Adjusting Elements Cannot Be Repaired.
Irregular valve noises are normal while starting the engine.