Overview - Timing Mechanism Drive Chain: Notes
WARNING: This page is about a different car, the 2010 Audi A5, 2009 Audi A5, and 2008 Audi A5. However, it is still accessible from the selected car via links, so may be relevant.
- Guide Rail
- Bolt
- 10 Nm + 90° additional turn
- Replace
- Bolt
- Tightening Specification. Refer to -item ) OVERVIEW - CAMSHAFT TIMING CHAINS - Bolt.
- Drive Chain Sprocket Thrust Washer
- Drive Sprocket for Left Timing Chain
- Bolt
- 10 Nm + 90° additional turn
- Replace
- Power Take-Off Drive Chain
- Before removing, mark the direction of rotation with paint
- Removing and installing. Refer to TIMING MECHANISM DRIVE CHAIN, REMOVING AND INSTALLING .
- Guide Rail
- Bolt
- 10 Nm + 90° additional turn
- Replace
- Bolt
- Tightening Specification. Refer to -item ) OVERVIEW - CAMSHAFT TIMING CHAINS - Bolt.
- Mounting Bracket for Drive Sprocket
- For the right camshaft timing chain
- Asymmetrical version
- Installed position. Refer to Figure
- Thrust Washer
- Asymmetrical version
- Installed position. Refer to Figure
- Drive Sprocket for Right Timing Chain
- Installed position. Refer to Figure
- Mounting Pin for the Drive Chain Sprocket
- Asymmetrical version
- Installed position. Refer to Figure
- Bolt
- Tightening Specification. Refer to -item ) OVERVIEW - CAMSHAFT TIMING CHAINS - Bolt.
- O-Ring
- Replace
- Chain Tensioner
- Bolt
- 9 Nm
- Crankshaft
- Bolt
- 10 Nm + 90° additional turn
- Replace