Pistons, Removing And Installing: Installing: Notes
WARNING: This page is about a different car, the 2015 Audi RS 5, 2014 Audi RS 5, and 2013 Audi RS 5. However, it is still accessible from the selected car via links, so may be relevant.
Install In Reverse Order Of Removal. Note The Following:
- Tightening Specifications. Refer To OVERVIEW - PISTON AND CONNECTING ROD .
NOTE:
Replace Any Bolts That Were Tightened With An Additional Turn.
-- Coat The Contact Surfaces On The Bearing Shells With Oil.
-- Install The Piston And Piston Ring Compressor.