LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 1196 (Crankshaft, Cylinder Block [CFSA] (Coupe)) >> 13 Crankshaft, Cylinder Block >> Cylinder Block, Belt Pulley Side >> Auxiliary Components Bracket, Removing And Installing >> Removing

Auxiliary Components Bracket, Removing And Installing: Removing

WARNING: This page is about a different car, the 2015 Audi RS 5, 2014 Audi RS 5, and 2013 Audi RS 5. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Removing Generator
GWWA27-10243Courtesy of AUDI OF AMERICA, LLC

-- Remove The Generator. Refer to GENERATOR, REMOVING AND INSTALLING .

-- Remove The Bolt -Arrows- And The Generator Bracket.

Fig 2: Identifying Bolts And Air Generator Bracket
GWWA17-10151Courtesy of AUDI OF AMERICA, LLC