Tail Pipes, Replacing: Procedure
WARNING: This page is about a different car, the 2010 Audi A5, 2009 Audi A5, and 2008 Audi A5. However, it is still accessible from the selected car via links, so may be relevant.
- Tightening Specification. Refer to OVERVIEW - MUFFLER .
-- Separate The Tailpipe -1- At The Separating Point -C- Using Chain Pipe Cutter:VAS6254 .
-- Connect The Tailpipe -3- Up To Marking -A- So That Slot On Tailpipe Lines Up With Marking -B-.
-- Tighten clamping sleeve nut -2-.