Tail Pipes, Aligning: Procedure

WARNING: This page is about a different car, the 2010 Audi A5, 2009 Audi A5, and 2008 Audi A5. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Checking Distance Of End Pipes At Left/Right To Bumper

Courtesy of AUDI OF AMERICA, LLC

Tightening Specification. Refer to OVERVIEW - MUFFLER .

-- Check distance of left and right tail pipes to bumper:

Dimension -x- left = dimension -x- right.

Correct dimension -x- as follows if necessary:

Fig 2: Identifying Brace Threaded Connection -Arrow-

Courtesy of AUDI OF AMERICA, LLC

-- Loosen The Brace Threaded Connection -Arrow- Between The Exhaust Pipes.

-- Adjust The Distance Of The Rear Mufflers To Each Other.