Left Engine Mount, Removing And Installing: Installing

WARNING: This page is about a different car, the 2010 Audi A5, 2009 Audi A5, and 2008 Audi A5. However, it is still accessible from the selected car via links, so may be relevant.

Tightening specifications. Refer to OVERVIEW - SUBFRAME MOUNT .

Install in reverse order of removal. Note the following:

NOTE:

Replace the bolts which are being tightened with an additional turn.

-- Tighten the subframe. Refer to SUBFRAME .

-- Install the engine oil cooler. Refer to ENGINE OIL COOLER, REMOVING AND INSTALLING .

-- Install the A/C compressor. Refer to A/C COMPRESSOR .

-- Install the After-Run Coolant Pump -V51-. Refer to After-Run Coolant Pump -V51-, REMOVING AND INSTALLING .