LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 1194 (Engine Assembly [CALA] (Coupe)) >> 10 Engine Assembly >> Engine, Removing And Installing >> Engine, Installing >> Engine, Installing >> Ground bolt to strut tower - tightening specification

Ground bolt to strut tower - tightening specification

WARNING: This page is about a different car, the 2010 Audi A5, 2009 Audi A5, and 2008 Audi A5. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Disengaging Catches -Arrows A- And Remove Upper Part Of Line Pass-Through -2- Upward -Arrow B-
GWWA10-10856Courtesy of AUDI OF AMERICA, LLC

-- Tighten the ground bolt -1- to 9 Nm.

scientia non olet · About LEMON Manuals