Fastener Tightening Specifications
WARNING: This page is about a different car, the 2015 Audi RS 5, 2014 Audi RS 5, and 2013 Audi RS 5. However, it is still accessible from the selected car via links, so may be relevant.
| Components | Fastener Size | Nm |
|---|---|---|
| Air guide to tunnel crossmember bolt | - | 3 |
| Bolts and Nuts | ||
| M6 | 9 | |
| M7 | 15 | |
| M8 | 20 | |
| M10 | 40 | |
| M12 | 65 | |
| Engine to S tronic transmission 0B5 tightening sequence | ENGINE, INSTALLING | |
| Engine Mount to Engine Support 1 | - | 90 + 90° |
| Engine Support | - | 40 |
| Ground bolt to strut tower | - | 9 |
| Ground wires to the longitudinal member | - | 9 |
| Heat Shield to Engine Support | - | 10 |
| Retaining Plate for Engine Mount | - | 20 |
| Subframe to Retaining Plate | - | 55 |
|
||