Right Engine Mount, Removing And Installing: Notes

WARNING: This page is about a different car, the 2015 Audi RS 5, 2014 Audi RS 5, and 2013 Audi RS 5. However, it is still accessible from the selected car via links, so may be relevant.

NOTE:

To avoid repeat repairs, do the following if the engine mount is faulty:

Replace the faulty engine mount and its retaining plate.

Likewise replace the engine mount on the opposite side, check the retaining plate and replace it if necessary.

Special tools and workshop equipment required

Engine Support Bridge:10-222A
Engine Support - Supplement Kit:T40093A