LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 1192 (Engine Assembly [CFSA] (Coupe)) >> 10 Engine Assembly >> Engine, Removing And Installing >> Engine, Installing >> Ground Bolt To Strut Tower - Tightening Specification

Ground Bolt To Strut Tower - Tightening Specification

WARNING: This page is about a different car, the 2015 Audi RS 5, 2014 Audi RS 5, and 2013 Audi RS 5. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Disengaging Catches -Arrows A- And Remove Upper Part Of Line Pass-Through -2- Upward -Arrow B-
GWWA10-10856Courtesy of AUDI OF AMERICA, LLC

-- Tighten the ground bolt -1- to 9 Nm.

scientia non olet · About LEMON Manuals