Fastener Tightening Specifications
WARNING: This page is about a different car, the 2015 Audi RS 5, 2014 Audi RS 5, and 2013 Audi RS 5. However, it is still accessible from the selected car via links, so may be relevant.
| Components | Fastener Size | Nm |
|---|---|---|
| Adjusting Buffer | - | 23 |
| Air Filter Housing for Secondary Air Injection Pump | - | 9 |
| Bracket3 | - | 23 |
| Bracket for Secondary Air Injection Pump, Bolt/Nut | - | 9 |
| Center Muffler, Nut | - | 23 |
| Connecting Piece | - | 5 |
| Connecting Pipe to the Left Cylinder Head | - | 9 |
| Exhaust Manifold with Catalytic Converter nut 1, 2 | - | 23 |
| Front Clamping Sleeve, Nut | - | 23 |
| Hose for Secondary Air | ||
| -Bolt | - | 5 |
| -Nut | - | 9 |
| Left Exhaust Manifold, Tightening Specifications and Sequence | Figure, | |
| Rear Clamping Sleeve, Nut | - | 23 |
| Right Exhaust Manifold, Tightening Specifications and Sequence | Figure | |
| Securing Strip1, 2 | - | 25 |
| Suspended Mount, Nut | - | 20 |
| Tab | - | 23 |
|
||