Combination Valve, Removing And Installing: Removing

WARNING: This page is about a different car, the 2015 Audi RS 5, 2014 Audi RS 5, and 2013 Audi RS 5. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Engine Cover (4.2L Engine)

Courtesy of AUDI OF AMERICA, LLC

-- Remove the engine cover in direction of -arrows-.

-- Remove the plenum chamber bulkhead. Refer to Bulkhead .

-- Disconnect the connector -4-.

Fig 2: Identifying Bolts -1-, Connector -4- And Vacuum Hose -5-, Removal

Courtesy of AUDI OF AMERICA, LLC

-- Remove the vacuum hose -5-.

-- Remove the secondary air hose -3- by pressing the release buttons.

-- Remove the bolts -2- and the Secondary Air Injection (AIR) combination valve.

NOTE:

Ignore item -1-.

To provide a better illustration, component location is shown from behind with engine removed.