Vehicles without Double Clamps Between Center and Rear Mufflers
WARNING: This page is about a different car, the 2015 Audi RS 5, 2014 Audi RS 5, and 2013 Audi RS 5. However, it is still accessible from the selected car via links, so may be relevant.
-- Loosen the bolts on the front clamping sleeves.
-- Push the exhaust system far enough forward -arrow- until the pre-load on the retaining loops in front of the center muffler is -a- = 6 to 10 mm.
-- Tighten the clamping sleeve threaded connections evenly.