Bearing Bracket, Removing And Installing: Installing

Courtesy of AUDI OF AMERICA, LLC

-- Install the bolts -arrows- and tighten them. Tightening specifications. Refer To -item 4-  OVERVIEW - CYLINDER HEAD.

-- Lubricate the hole -arrow- with engine oil.

Courtesy of AUDI OF AMERICA, LLC

• Carefully Mount The Bearing Bracket Without Tilting It.

  Courtesy of AUDI OF AMERICA, LLC

-- Attach the bearing mount and install the bolts -arrows- all the way by hand.

-- Depending on the version, remove either the :T40011  or the :T40267  .

-- Tighten the bearing bracket bolts -arrows-. Refer To OVERVIEW - CAMSHAFT TIMING CHAINS .

Installation Is Performed In Reverse Order Of Removal, Noting The Following: 

-- Install the upper timing chain cover. Refer To UPPER TIMING CHAIN COVER, REMOVING AND INSTALLING .

-- There May Be Additional Procedures Depending On The Model. Refer To OVERVIEW - CAMSHAFT TIMING CHAINS and OVERVIEW - BALANCE SHAFT DRIVE CHAIN ; Bearing Bracket, Removing and installing. Refer To BEARING BRACKET, REMOVING AND INSTALLING