Balance Shaft Drive Chain, Removing And Installing: Installing

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2017 Audi A5 Quattro, 2016 Audi A5 Quattro, 2015 Audi A5 Quattro, 2014 Audi A5 Quattro, and 2013 Audi A5. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of AUDI OF AMERICA, LLC

-- Turn The Intermediate Sprocket And Balance Shaft To The Marking -arrow-.

-- Mount The Timing Chain; The Painted Links Of The Timing Chain Must Be Positioned On The Markings On The Chain Sprockets.

Courtesy of AUDI OF AMERICA, LLC

-- Install The Timing Chain Guide Rail And Tighten The Bolts -4-.

Courtesy of AUDI OF AMERICA, LLC

-- Install The Timing Chain Guide Rail And Tighten The Bolts -3-.

-- Install The Timing Chain Tensioning Rail And Tighten The Bolt -2-.

-- Coat The Chain Tensioner Seal -1- With Sealant. Refer To The Parts Information For The Sealant.

-- Install The Timing Chain Tensioner -1-.

-- Check The Setting One More Time.

Courtesy of AUDI OF AMERICA, LLC

-- Check The Markings On The Intermediate Sprocket/Balance Shaft -arrow-.

Courtesy of AUDI OF AMERICA, LLC

NOTE:

For Clarity The Marking On The Intermediate Sprocket/Balance Shaft Is Shown With The Chain Removed.

Further Installation Is Performed In Reverse Order Of Removal, While Noting The Following:

-- Install the camshaft timing chain. Refer To CAMSHAFT TIMING CHAIN, REMOVING AND INSTALLING .