Knock Sensor, Removing And Installing: Installing
WARNING: This page is about a different car, the 2010 Audi A5, 2009 Audi A5, and 2008 Audi A5. However, it is still accessible from the selected car via links, so may be relevant.
-- Install the removed knock sensor.
NOTE:
The tightening specification influences the function of the knock sensor.
- Tightening specification: Ignition System Assembly Overview. Refer to OVERVIEW - IGNITION SYSTEM
-- Install the lower intake manifold section with the fuel rail INTAKE MANIFOLD LOWER SECTION WITH FUEL RAIL, REMOVING AND INSTALLING .
-- Reinstall intake manifold INTAKE MANIFOLD UPPER SECTION, REMOVING AND INSTALLING .