Knock Sensors -G61- / -G66- / -G198- / -G199-, Removing And Installing: Installing
WARNING: This page is about a different car, the 2015 Audi RS 5, 2014 Audi RS 5, and 2013 Audi RS 5. However, it is still accessible from the selected car via links, so may be relevant.
Install in reverse order of removal. Note The Following:
- Tightening specifications. Refer to OVERVIEW - IGNITION SYSTEM .
NOTE:
When installing, bring all cable ties back to same positions.
-- Install the high pressure line. Refer to HIGH PRESSURE PIPE, REMOVING AND INSTALLING .
-- Install the intake manifold upper section. Refer to INTAKE MANIFOLD UPPER SECTION, REMOVING AND INSTALLING .