Ignition Coils, Removing And Installing: Installing
WARNING: This page is about a different car, the 2015 Audi RS 5, 2014 Audi RS 5, and 2013 Audi RS 5. However, it is still accessible from the selected car via links, so may be relevant.
- Tightening specifications. Refer to OVERVIEW - IGNITION SYSTEM .
-- Install all the ignition coils loosely into the spark plug shaft.
-- Align and connect the ignition coils to the connectors all at the same time.
-- Push the ignition coils evenly onto the spark plugs by hand (do not use a hammer).