LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 1181 (Ignition/Glow Plug System [CFSA] (2 Of 2) (Coupe)) >> 28 Ignition/Glow Plug System >> Ignition System >> Engine Speed Sensor -G28-, Removing And Installing >> Removing

Engine Speed Sensor -G28-, Removing And Installing: Removing

WARNING: This page is about a different car, the 2015 Audi RS 5, 2014 Audi RS 5, and 2013 Audi RS 5. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Automatic Transmission Fluid Oil Pan
GWWA10-11071Courtesy of AUDI OF AMERICA, LLC

-- Remove the rear noise insulation -2-. Refer to NOISE INSULATION .

-- Disconnect the connector -2-.

Fig 2: Locating Engine Speed (RPM) Sensor -G28-
GWWA28-10011Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolt -1- and then remove the Engine Speed Sensor -G28- downward.